Arbortech AS160 Allsaw Brick Block Restoration Saw [AS160] $1,049.09

Arbortech AS160 Allsaw

Think Outside the Circle

The Award Winning AS160 Brick and Mortar Saw featuring
Allsaw Technology represents a revolution in cutting technology.
Using a unique patented orbital cutting motion with two forward
facing blades that combine to perform both a hammering and
cutting action, the AS160 Brick and mortar saw allows for clear
visibility and empowers the professional with the ability to cut
square, cut deep, cut dry, and cut safe with no flydust. The AS160
offers extreme levels of precision, accuracy and control allowing
the tool to be used for a wide range of applications, from heritage
masonry work to electrical installations.

AS160 Cutting Material Guide

Building Material

• Bricks (up to 50MPa)
• Mortar
• Fibre Cement
• Fast Block

Rock

• Soft Sandstone
• Natural Limestone
• Soft to Medium Stone

*Wood

• Hard Wood
• Chip or Ply wood
• Dirty wood
• Tree roots in the ground
• * (Wood blades optional extra)

Plastics

• Foam
• PVC
• Acrylic
• Fibreglass Sheet

Visibility

The unique blade position allows clear visibility of the material while cutting.

Cuts Square

The AS160 is able to cut square corners, requiring no over cutting, or bolstering.

Plunge Cuts

Use the AS160 to cut directly into flush walls without stitch drillng.

Cuts Safe

Unlike conventional disc cutters, the AS160 does not generate flydust, and because it is belt driven theere is no kickback

Cuts Dry

Cuts masonry materials with significantly less respirable dust than disc cutters.

Cuts Deep

The AS160 is the only small, handheld saw able to cut to depths of 120mm/4-3/4" (Plunge blade) in masonry materials

Renovation, Restoration and Repair

The Arbortech AS160 Brick + Mortar Saw is an ideal tool for both trade professionals and DIY enthusiasts, as it covers a wide range of renovation, restoration and repair work:

• Housing repairs and re-pointing
• Extensions and additions
• Renovations and alterations
• Chimney repair & restoration

These are some of the ideal applications for the AS160:

• Toothing brickwork for extensions.
• Tuckpointing.
• Fast removal of in-built objects such as anchors, wall plates, joists, trusses, frames, sills, beams, lintels, wall units and steps.
• Expansion joints and wall section replacement.
• Removal of in-built furniture, plumbing and vanities.
• Cutting of archways and windows.

Installations

• Vents.
• Ducts.
• Registers.
• Plumbing.
• Electrical cabling, conduit & switch boxes.
• Electrical goods.
• Windows.
• Ablutions.
• Lighting.
• Waste units.
• A/C units